For troubleshooting common issues, please refer to the list below. If you continue to have issue with you CondenserNeedle, please contact us.

Problem	Probable Cause	Recommended Remedy
No water when spray gun trigger is squeezed	Water is not turned on Hoses and/or nozzle clogged	Turn water on Check hoses and nozzles for clogs
Low water pressure or flow	Restricted valves, nozzle or hoses Low input flow or pressure	Open all valves completely; check hoses and nozzles for debris. Check for other valves that are not completely open.
No Chemical flowing	Siphon hose control valve closed Siphon hose strainer clogged Siphon clogged Hose kinked Water flow too low	Roll control valve wheel Clear any clogs Clean siphon Check hose for pinch bends Make sure all valves are completely open
Leaks	Worn seals Debris caught in seal	Replace seals (Contact Factory) Clear debris

If, after attempting these troubleshooting tips, you continue to have problems with your CondenserNeedle, please contact us.