Parts & Accessories

  • CoilJet Car Lighter Inverter Adapter

    On-the-go charging for CoilJet Charge on the go. With the CoilJet Car Lighter Inverter/Adapter you can recharge your CoilJet between jobs while on the go. Simply plug into any standard car cigarette lighter and keep your CoilJet powered up for immediate use.
    • Small and portable.
    • Ideal for charging CoilJet on the road.
    • Can also be used for other small electronics charging.
  • SpeedyFoam Condenser Coil Cleaner

    The smarter, safer & biodegradable alkaline foaming micro bubble coil cleaner SpeedyFoam is safe for coated and uncoated coils. It is an acid-free, alkaline, non-caustic, degreasing foaming formula. (Say that ten times fast, I dare you). It's safer for employees to use, more effective on grease and works great on all metals and has a clean, fresh scent. Plus it's 4x concentrated, so you get more bang for your buck. It's designed for use with CoilJet and Condenser Needle but can be used with pump sprayers too.
    • Foaming micro bubble coil cleaner, non-acid, non-fuming and water soluble
    • Removes grime, oil, grease and rust from condenser and evaporator coils, mechanical equipment and air filters.
    • Non caustic and safe for all metals, including aluminum
    • Safer for coated and uncoated coils
  • SpeedyBright Biodegradable Descaler/Limescale Remover

    Safe and effective descaler and lime scale remover approved for potable water use Scientifically formulated to dissolve all types of limescale, rust and calcium carbonate deposits from water passages and heating elements. SpeedyBright improves operating efficiency in tankless water heaters, gas/electric water heaters and other water heating/heat exchange systems. Extend the usable life of cleaned equipment by quickly and safely removing energy robbing contaminants. Phosphoric acid based cleaner classified by UL to NFS/ANSI Standard 60.
    • Removes lime scale effectively
    • Approved for potable water use
    • Works great with BucketDescaler®
  • CoilJet Foaming Nozzle

    Creates a thick, rich lather to lift dirt and debris from coils. The CoilJet foaming nozzle is designed to add air to the spray of foaming coil cleaner, increasing foam levels and helping lift and remove dirt from HVAC and refrigeration coils.
    • Creates a thick, rich lather for better cleaning.
    • Best if use with SpeedyFoam coil cleaner.
    • Increases cleaning effectiveness by lifting out dirt embedded in coils.
  • CoilJet Flexible Wand

    Reach virtually any coil in even the tightest spots. The CoilJet flexible wand can be bent to your ultimate will! Shape it to any bend or curve to reach coils in even the tightest spots.
    • Perfect for hard-to-reach coils.
    • Made from high grade copper materials.
    • Makes cleaning coils in tight spaces easier.
  • Mini-Split Bib Kit Replacement Bib

    High-quality replacement bib. The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.
    • For use with Mini-Split Bib Kit.
    • Made from high grade 4 mil plastic.
    • Long life usage.
  • CoilJet Flexible Wand 0°

    Designed for ductless units, PTAC's and more. The CoilJet 0° flexible wand is the answer to cleaning small coils like you find in mini split air handlers, PTAC units and refrigeration units. It attaches quickly to your CoilJet coil cleaner and can be bent to your will to get right up on coils and clean them. Wand is available in 12" (8945-0-DEG-FW12) and 24" (8945-0-DEG-FLEX).
    • Perfect for hard-to-reach coils.
    • Made from high grade copper materials.
    • Makes cleaning coils in tight spaces easier.
  • Mini-Split Bib Kit Replacement Tape

    Keeps electronics and walls safe The Mini-Split Bib kit replacement tape is a 2" low tack adhesive tape on a roll. It is provided so you can cover sensitive electronics and walls to protect from over spray or mounting scuff marks
    • For use with Mini Split Bib Kit
    • Made from high grade plastic
    • Low tack adhesive grips strong but leaves no lasting mess
  • BucketDescaler Expansion Valve Kit

    Make bigger jobs seem small. The BucketDescaler expansion valve kit supersizes your bucketdescaler by allowing you to draw more volume into the system. Use it to draw more descaler or makeup water to descale larger heat exchangers, hot water tanks, boilers and more.
    • Installs quickly and easily.
    • Increases the volume of descaler and water for bigger jobs.
    • Made from acid proof fittings.
  • BucketDescaler pH Testing Roll

    You can't beat what you can't measure. The BucketDescaler pH testing roll is a quick, handy way to identify the pH of new or spent liquids. It is an integral part of the descaling process as it can quickly identify if the descaling liquid is still active for further descaling, or can identify when it has reached appropriate pH for disposal.
    • Color coded for easy identification.
    • Small portable package
    • Carrying case protects from elements.
  • FlowJet Spray Wand

    Reach spots that seem impossible. This high quality wand quickly attaches to the FlowJet and allows you to clean coils deep into the condenser or evaporator. Now reaching thick dirty coils in tight spots is easier than ever before. To extend the wand further, use with our extension lance, available in 16" (CJ-WWSS-EXT).
    • Attaches quickly to FlowJet spray gun.
    • Adds cleaning length to make jobs easier.
    • Made from high grade stainless steel.
  • BucketVac Standard Filters

    High performance filtering, incredible durability. The replacement BucketVac filter offers high performance 10 micron filtering, all in an easy to use, durable paper filter bag. These filters are made from quality industrial components and aren't cheap, flimsy knock offs or wrap around cloth remnants.
    • Easy installation with integrated elastic bands.
    • 10 micron filtering removes all major particles.
    • Shake to clean for months of use.

Title